Atom

Factory Reset Atom Android Phone

Are you prepared to promote your Atom Orbit smartphone or hand it right down to a brand-new owner? Maybe your smartphone isn’t running successfully, otherwise you need a fresh begin. Regardless of the case may be, every so often your great bet is a manufacturing facility reset Android to get it again to the way it changed into the first time you turned it on (at the least software-wise). Let’s show you everything there is to understand approximately the process.

If you are going to Factory reset Android due to smartphone malfunctions, you can attempt finding your trouble in our guide for Android problems and a way to repair them.

Choose your Mobile

A Word Of Warning: Allow’s get the disclosure out of the manner. Performing an Android factory reset will delete all your data and get the software program lower back to its unique state. This indicates all apps and information stored on your device can be deleted. Make certain to back up all crucial documents and information earlier than proceeding.

If none of those answers work, you could continually try a restart or a soft reset (hold down the power button for 30 seconds), which won’t delete all your information. If you have exhausted all troubleshooting and need to reset Android, keep reading.

About Factory Reset

A Factory Reset, additionally known as Hard Reset or master reset, is the restoration of a device to the state it was in when it left the factory. All settings, applications, and data added by the user have removed means permanently deleted.

Factory Reset From Settings

  • First of all, power on your Atom Orbit smartphone by pressing the power button.
  • Then, Go to the Settings menu.
Factory Reset From Settings
  • After that, click on the Backup and Reset option.
  • Now select the Factory Data Reset option.
  • Subsequently, choose the Reset phone option.
  • If you want to delete portable storage information, tap on the Erase everything.
  • Reset completed to your smartphone.

Click below link to get all Android phone factory reset methods.

Factory Reset

Hard Reset

  • First of all, turn off your Atom Orbit device and wait some time.
  • Now press and hold the Volume Up and power button or
    • volume down and power button
  • Next, release all buttons when you see a Logo.
  • Subsequently, You will see the Android exclamation mark.
  • Next, hold down the power button, press and release the Volume + Button.
  • After a while you got recovery mode Use Volume choose the wipe data/factory reset and press the power key to confirm.
  • Then, select the option Yes.
  • After that, select the Reboot system now option.
  • Reset completed on your smartphone.

Click below link to get all Android phone Hard Reset methods.

Hard Reset

Factory Reset Atom Maximus

Are you prepared to promote your Atom Maximus smartphone or hand it right down to a brand new owner? Maybe your smartphone isn’t running successfully, otherwise you need a fresh begin. Regardless of the case may be, every so often your great bet is to manufacturing facility reset Android to get it again to the way it changed into the first time you turned it on (at the least software-wise). Let’s show you everything there is to understand approximately the process.

If you are going to Factory reset Android due to smartphone malfunctions, you can attempt finding your trouble in our guide for Android problems and a way to repair them.

A Word Of Warning: Allow’s get the disclosure out of the manner. Performing an Android factory reset will delete all your data and get the software program lower back to its unique state. This indicates all apps and information stored on your device can be deleted. Make certain to back up all crucial documents and information earlier than proceeding.

If none of those answers work, you could continually try a restart or a soft reset (hold down the power button for 30 seconds), which won’t delete all your information. If you have exhausted all troubleshooting and need to reset Android, keep reading.

About Factory Reset

A Factory Reset, additionally known as Hard Reset or master reset , is the restoration of a device to the state it was in when it left the factory. All settings, applications, and data added by the user have removed means permanently deleted.

Factory Reset From Settings

  • First of all, power on your Atom Maximus smartphone by pressing the power button.
  • Then, Go to the Settings menu.
Factory Reset From Settings
  • After that, click on the Backup and Reset option.
  • Now select the Factory Data Reset option.
  • Subsequently, choose the Reset phone option.
  • If you want to delete portable storage information, tap on the Erase everything.
  • Reset completed to your smartphone.

Click below link to get all Android phone factory reset methods.

Factory Reset

Hard Reset

  • First of all, turn off your Atom Maximus device and wait some time.
  • Now press and hold the Volume Up and power button or
    • volume down and power button
  • Next, Release all buttons when you see a Logo.
  • Subsequently, You will see the Android exclamation mark.
  • Next, hold down the power button, press and release the Volume + Button.
  • After a while you got recovery mode Use Volume choose the wipe data/factory reset and press the power key to confirm.
  • Then, select the option Yes.
  • After that, select the Reboot system now option.
  • Reset completed on your smartphone.

click below link to get all Android phone Hard Reset methods.

Hard Reset

Factory Reset Atom Ultimus

Are you prepared to promote your Atom Ultimus smartphone or hand it right down to a brand new owner? Maybe your smartphone isn’t running successfully, otherwise you need a fresh begin. Regardless of the case may be, every so often your great bet is to manufacturing facility reset Android to get it again to the way it changed into the first time you turned it on (at the least software-wise). Let’s show you everything there is to understand approximately the process.

If you are going to Factory reset Android due to smartphone malfunctions, you can attempt finding your trouble in our guide for Android problems and a way to repair them.

A Word Of Warning: Allow’s get the disclosure out of the manner. Performing an Android factory reset will delete all your data and get the software program lower back to its unique state. This indicates all apps and information stored on your device can be deleted. Make certain to back up all crucial documents and information earlier than proceeding.

If none of those answers work, you could continually try a restart or a soft reset (hold down the power button for 30 seconds), which won’t delete all your information. If you have exhausted all troubleshooting and need to reset Android, keep reading.

About Factory Reset

A Factory Reset, additionally known as Hard Reset or master reset , is the restoration of a device to the state it was in when it left the factory. All settings, applications, and data added by the user have removed means permanently deleted.

Factory Reset From Settings

  • First of all, power on your Atom Ultimus smartphone by pressing the power button.
  • Then, Go to the Settings menu.
Factory Reset From Settings
  • After that, click on the Backup and Reset option.
  • Now select the Factory Data Reset option.
  • Subsequently, choose the Reset phone option.
  • If you want to delete portable storage information, tap on the Erase everything.
  • Reset completed to your smartphone.

Click below link to get all Android phone factory reset methods.

Factory Reset

Hard Reset

  • First of all, turn off your Atom Ultimus device and wait some time.
  • Now press and hold the Volume Up and power button or
    • volume down and power button
  • Next, Release all buttons when you see a Logo.
  • Subsequently, You will see the Android exclamation mark.
  • Next, hold down the power button, press and release the Volume + Button.
  • After a while you got recovery mode Use Volume choose the wipe data/factory reset and press the power key to confirm.
  • Then, select the option Yes.
  • After that, select the Reboot system now option.
  • Reset completed on your smartphone.

click below link to get all Android phone Hard Reset methods.

Hard Reset

Factory Reset Atom Supremus

Are you prepared to promote your Atom Supremus smartphone or hand it right down to a brand new owner? Maybe your smartphone isn’t running successfully, otherwise you need a fresh begin. Regardless of the case may be, every so often your great bet is to manufacturing facility reset Android to get it again to the way it changed into the first time you turned it on (at the least software-wise). Let’s show you everything there is to understand approximately the process.

If you are going to Factory reset Android due to smartphone malfunctions, you can attempt finding your trouble in our guide for Android problems and a way to repair them.

A Word Of Warning: Allow’s get the disclosure out of the manner. Performing an Android factory reset will delete all your data and get the software program lower back to its unique state. This indicates all apps and information stored on your device can be deleted. Make certain to back up all crucial documents and information earlier than proceeding.

If none of those answers work, you could continually try a restart or a soft reset (hold down the power button for 30 seconds), which won’t delete all your information. If you have exhausted all troubleshooting and need to reset Android, keep reading.

About Factory Reset

A Factory Reset, additionally known as Hard Reset or master reset , is the restoration of a device to the state it was in when it left the factory. All settings, applications, and data added by the user have removed means permanently deleted.

Factory Reset From Settings

  • First of all, power on your Atom Supremus smartphone by pressing the power button.
  • Then, Go to the Settings menu.
Factory Reset From Settings
  • After that, click on the Backup and Reset option.
  • Now select the Factory Data Reset option.
  • Subsequently, choose the Reset phone option.
  • If you want to delete portable storage information, tap on the Erase everything.
  • Reset completed to your smartphone.

Click below link to get all Android phone factory reset methods.

Factory Reset

Hard Reset

  • First of all, turn off your Atom Supremus device and wait some time.
  • Now press and hold the Volume Up and power button or
    • volume down and power button
  • Next, Release all buttons when you see a Logo.
  • Subsequently, You will see the Android exclamation mark.
  • Next, hold down the power button, press and release the Volume + Button.
  • After a while you got recovery mode Use Volume choose the wipe data/factory reset and press the power key to confirm.
  • Then, select the option Yes.
  • After that, select the Reboot system now option.
  • Reset completed on your smartphone.

click below link to get all Android phone Hard Reset methods.

Hard Reset

Download Atom Flash File – Latest Stock Firmware

Here you could download flash file for Atom Android phone. You may download and install the latest and original stock ROM (Firmware) free of charge. Moreover, flash tools to be hard to flash your Atom mobile.

Flashing stock firmware will permanently delete your device information. If possible, backup all personal information like photos, contacts, and apps, and so on to prevent data loss.

Download Atom official stock firmware from the link here, and observe the furnished flashing instructions to learn how to flash the stock ROM.

Find Your Phone Brand to Download Flash File

What is Android Flashing?

Android Flashing means putting off stock firmware (software) from android device and replace with identical model or some other model. Honestly, flashing means converting the working device. You may flash your tool with recovery mode or Flash device.

You could upgrade or downgrade the firmware with flashing. Flashing will fix software issues, IMEI related issues and enhance tool basic performance. Flashing delete all your device data like photos, contacts, and apps, and so on.

What is the Stock ROM?

Stock ROMs are those that come through default in Android gadgets like smartphone and tablets and so forth. These are customized versions of Android advanced by means of manner of producers and vendors to permit users keep on with their gadgets with specific looks and functions. All the “out-of-the-box” smartphones or tablets or other gadgets are all shipped with stock ROM.

Benefit Of Atom Firmware

  • To clear up the lag or stutter
  • Update and downgrade
  • Flash stock ROM to unbrick your Atom Android mobile
  • By means of flashing stock ROM, you could restore software program troubles.
  • Uproot or fix bugs at the smartphone
  • Smartphone boots directly into its bootloader
  • Revert to stock to get your guarantee
  • keeps rebooting trouble
  • In case your smartphone boots immediately into recovery

Before Flashing

Charge the phone as a minimum of 50% without interrupting the flashing manner with a low battery. Interrupting the firmware installation approach, bricking your cellphone.

Flashing with Recovery Mode

This method will delete all your data in your Atom Android mobile like media, contacts, and apps. So back up your mobile data earlier than the flashing process on your mobile.

Follow these steps to flash stock firmware with Recovery mode.

Method 1

  • Download the firmware file and move it to SD Card storage.
  • Firstly, turn off your device and wait some time.
  • In this step, press and hold the
    • Volume Up and power button or
    • Volume down and power button
  • Next, release all buttons when you see a Logo.
  • Now, You will see the Android exclamation mark.
  • Next, hold down the power button, press and release the Volume + Button.
wipe data/factory reset
  • After sometimes you got recovery mode, Use Volume choose the wipe data/factory reset and press the power key to confirm.
  • Then, select the option Yes.
  • As quickly as the reset is complete, you’ll be bounced again to the recovery mode menu.
  • Now select apply update from SD card option.
  • Then find the downloaded firmware file from storage.
  • After that, tap at the firmware file and install it.
  • Your device will start updating automatically.
  • Spontaneously, your device should boot to the new version.

If the above method does not work, observe this Hard reset to wipe all data.

Method – 2

  • Download the firmware file and move it to SD Card storage.
  • Firstly, turn off your device and wait some time.
  • In this step, press and hold the
    • Volume Up and power button or
    • Volume down and power button
  • In this step, release all buttons when you see a Logo.
  • Now, You will see the Android exclamation mark.
  • Next, hold down the power button, press and release the Volume + Button.
  • After sometimes you got recovery mode, Use Volume choose the wipe data/factory reset and press the power key to confirm.
  • Then, select the option Yes.
  • Subsequent, pick out the Reboot to device option.
  • After that, download the Firmware update file and move to drive storage (Do not put the file within the folder).
  • Then locate the downloaded firmware file from storage.
Flashing with Recovery
  • Now, tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • Ultimately, your device should boot to the new edition.

If the above method does not work, observe this Hard reset to wipe all data.

Exit Recovery mode

If you’re caught at recovery mode or do you want to go out from recovery, follow these steps.

  • Select the Reboot system option, the use of volume keys, and press the power key to confirm.
  • Next, Your device will be rebooted automatically.
  • Now you’re successfully excited from recovery mode.
  • You may additionally go out from recovery mode by using pressing power button for 10 seconds.

Flashing with Flash Tool

You want a computer, flash device, flash file, USB drivers, and USB cable to flash with this method. All data might be deleted after flashing, so back up all data like pics and contacts, and so on to save your information loss.

  • Take a look at out beneath points to flash your Atom Android phone with the flash device.
  • First download the flash file, flash device, and USB drivers for your pc.
  • Then, install the USB drivers to your Android phone.
  • Next, release the Flash device to your pc.
  • Then, switch off your phone.
  • After that, press and keep volume Up + power Button {or} volume Down + power Button
  • After that, connect your phone to the pc with a USB cable.
  • Then, browse the flash file within the flash device and click on at the download button.
  • Now, flashing begins to your phone.
  • Flashing takes 5 to 10 minutes. Please wait till flashing finished.

Download Flash Tool

Proper right here you may download the high-quality Android Flash equipment of Atom phone without any fee. You may flash the firmware (stock ROM) with these flash tools.
Check out beneath hyperlink to download the Flash tools.

Download USB Drivers

Proper right here you could download and installation Atom phone USB (normal Serial Bus) drivers free of charge. We offer authentic links for original tool producers websites.

Take a look at out under hyperlink to download the USB drivers.

Download USB Drivers

Atom Maximus Flash File

Here you could download flash file for Atom Maximus Android phone. You may download and install the latest and original stock ROM (Firmware) free of charge. Moreover, flash tools to be hard to flash your Atom mobile.

Flashing stock firmware will permanently delete your device information. If possible, backup all personal information like photos, contacts, and apps, and so on to prevent data loss.

Download Atom Maximus official stock firmware from the link here, and observe the furnished flashing instructions to learn how to flash the stock ROM.

What is Android Flashing?

Android Flashing means putting off stock firmware (software) from android device and replace with identical model or some other model. Honestly, flashing means converting the working device. You may flash your tool with recovery mode or Flash device.

You could upgrade or downgrade the firmware with flashing. Flashing will fix software issues, IMEI related issues and enhance tool basic performance. Flashing delete all your device data like photos, contacts, and apps, and so on.

What is the Stock ROM?

Stock ROMs are those that come through default in Android gadgets like smartphone and tablets and so forth. These are customized versions of Android advanced by means of manner of producers and vendors to permit users keep on with their gadgets with specific looks and functions. All the “out-of-the-box” smartphones or tablets or other gadgets are all shipped with stock ROM.

Benefit Of Atom Maximus Firmware

  • To clear up the lag or stutter
  • Update and downgrade
  • Flash stock ROM to unbrick your Atom Maximus Android mobile
  • By means of flashing stock ROM, you could restore software program troubles.
  • Uproot or fix bugs at the smartphone
  • Smartphone boots directly into its bootloader
  • Revert to stock to get your guarantee
  • keeps rebooting trouble
  • In case your smartphone boots immediately into recovery

Before Flashing

Charge the phone as a minimum of 50% without interrupting the flashing manner with a low battery. Interrupting the firmware installation approach, bricking your cellphone.

Flashing with Recovery Mode

This method will delete all your data in your Atom Maximus Android mobile like media, contacts, and apps. So back up your mobile data earlier than the flashing process on your mobile.

Follow these steps to flash stock firmware with Recovery mode.

Method 1

  • Download the firmware file and move it to SD Card storage.
  • Firstly, turn off your device and wait some time.
  • In this step, press and hold the
    • Volume Up and power button or
    • Volume down and power button
  • Next, release all buttons when you see a Logo.
  • Now, You will see the Android exclamation mark.
  • Next, hold down the power button, press and release the Volume + Button.
wipe data/factory reset
  • After sometimes you got recovery mode, Use Volume choose the wipe data/factory reset and press the power key to confirm.
  • Then, select the option Yes.
  • As quickly as the reset is complete, you’ll be bounced again to the recovery mode menu.
  • Now select apply update from SD card option.
  • Then find the downloaded firmware file from storage.
  • After that, tap at the firmware file and install it.
  • Your device will start updating automatically.
  • Spontaneously, your device should boot to the new version.

If the above method does not work, observe this Hard reset to wipe all data.

Method – 2

  • Download the firmware file and move it to SD Card storage.
  • Firstly, turn off your device and wait some time.
  • In this step, press and hold the
    • Volume Up and power button or
    • Volume down and power button
  • In this step, release all buttons when you see a Logo.
  • Now, You will see the Android exclamation mark.
  • Next, hold down the power button, press and release the Volume + Button.
  • After sometimes you got recovery mode, Use Volume choose the wipe data/factory reset and press the power key to confirm.
  • Then, select the option Yes.
  • Subsequent, pick out the Reboot to device option.
  • After that, download the Firmware update file and move to drive storage (Do not put the file within the folder).
  • Then locate the downloaded firmware file from storage.
Flashing with Recovery
  • Now, tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • Ultimately, your device should boot to the new edition.

If the above method does not work, observe this Hard reset to wipe all data.

Exit Recovery mode

If you’re caught at recovery mode or do you want to go out from recovery, follow these steps.

  • Select the Reboot system option, the use of volume keys, and press the power key to confirm.
  • Next, Your device will be rebooted automatically.
  • Now you’re successfully excited from recovery mode.
  • You may additionally go out from recovery mode by using pressing power button for 10 seconds.

Flashing with Flash Tool

You want a computer, flash device, flash file, USB drivers, and USB cable to flash with this method. All data might be deleted after flashing, so back up all data like pics and contacts, and so on to save your information loss.

  • Take a look at out beneath points to flash your Atom Maximus Android phone with the flash device.
  • First download the flash file, flash device, and USB drivers for your pc.
  • Then, install the USB drivers to your Android phone.
  • Next, release the Flash device to your pc.
  • Then, switch off your phone.
  • After that, press and keep volume Up + power Button {or} volume Down + power Button
  • After that, connect your phone to the pc with a USB cable.
  • Then, browse the flash file within the flash device and click on at the download button.
  • Now, flashing begins to your phone.
  • Flashing takes 5 to 10 minutes. Please wait till flashing finished.

Download Flash Tool

Proper right here you may download the high-quality Android Flash equipment of Atom Maximus phone without any fee. You may flash the firmware (stock ROM) with these flash tools.
Check out beneath hyperlink to download the Flash tools.

Download USB Drivers

Proper right here you could download and installation Atom Maximus phone USB (normal Serial Bus) drivers free of charge. We offer authentic links for original tool producers websites.

Take a look at out under hyperlink to download the USB drivers.

Download USB Drivers

Atom Ultimus Flash File

Here you could download flash file for Atom Ultimus Android phone. You may download and install the latest and original stock ROM (Firmware) free of charge. Moreover, flash tools to be hard to flash your Atom mobile.

Flashing stock firmware will permanently delete your device information. If possible, backup all personal information like photos, contacts, and apps, and so on to prevent data loss.

Download Atom Ultimus official stock firmware from the link here, and observe the furnished flashing instructions to learn how to flash the stock ROM.

What is Android Flashing?

Android Flashing means putting off stock firmware (software) from android device and replace with identical model or some other model. Honestly, flashing means converting the working device. You may flash your tool with recovery mode or Flash device.

You could upgrade or downgrade the firmware with flashing. Flashing will fix software issues, IMEI related issues and enhance tool basic performance. Flashing delete all your device data like photos, contacts, and apps, and so on.

What is the Stock ROM?

Stock ROMs are those that come through default in Android gadgets like smartphone and tablets and so forth. These are customized versions of Android advanced by means of manner of producers and vendors to permit users keep on with their gadgets with specific looks and functions. All the “out-of-the-box” smartphones or tablets or other gadgets are all shipped with stock ROM.

Benefit Of Atom Ultimus Firmware

  • To clear up the lag or stutter
  • Update and downgrade
  • Flash stock ROM to unbrick your Atom Ultimus Android mobile
  • By means of flashing stock ROM, you could restore software program troubles.
  • Uproot or fix bugs at the smartphone
  • Smartphone boots directly into its bootloader
  • Revert to stock to get your guarantee
  • keeps rebooting trouble
  • In case your smartphone boots immediately into recovery

Before Flashing

Charge the phone as a minimum of 50% without interrupting the flashing manner with a low battery. Interrupting the firmware installation approach, bricking your cellphone.

Flashing with Recovery Mode

This method will delete all your data in your Atom Ultimus Android mobile like media, contacts, and apps. So back up your mobile data earlier than the flashing process on your mobile.

Follow these steps to flash stock firmware with Recovery mode.

Method 1

  • Download the firmware file and move it to SD Card storage.
  • Firstly, turn off your device and wait some time.
  • In this step, press and hold the
    • Volume Up and power button or
    • Volume down and power button
  • Next, release all buttons when you see a Logo.
  • Now, You will see the Android exclamation mark.
  • Next, hold down the power button, press and release the Volume + Button.
wipe data/factory reset
  • After sometimes you got recovery mode, Use Volume choose the wipe data/factory reset and press the power key to confirm.
  • Then, select the option Yes.
  • As quickly as the reset is complete, you’ll be bounced again to the recovery mode menu.
  • Now select apply update from SD card option.
  • Then find the downloaded firmware file from storage.
  • After that, tap at the firmware file and install it.
  • Your device will start updating automatically.
  • Spontaneously, your device should boot to the new version.

If the above method does not work, observe this Hard reset to wipe all data.

Method – 2

  • Download the firmware file and move it to SD Card storage.
  • Firstly, turn off your device and wait some time.
  • In this step, press and hold the
    • Volume Up and power button or
    • Volume down and power button
  • In this step, release all buttons when you see a Logo.
  • Now, You will see the Android exclamation mark.
  • Next, hold down the power button, press and release the Volume + Button.
  • After sometimes you got recovery mode, Use Volume choose the wipe data/factory reset and press the power key to confirm.
  • Then, select the option Yes.
  • Subsequent, pick out the Reboot to device option.
  • After that, download the Firmware update file and move to drive storage (Do not put the file within the folder).
  • Then locate the downloaded firmware file from storage.
Flashing with Recovery
  • Now, tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • Ultimately, your device should boot to the new edition.

If the above method does not work, observe this Hard reset to wipe all data.

Exit Recovery mode

If you’re caught at recovery mode or do you want to go out from recovery, follow these steps.

  • Select the Reboot system option, the use of volume keys, and press the power key to confirm.
  • Next, Your device will be rebooted automatically.
  • Now you’re successfully excited from recovery mode.
  • You may additionally go out from recovery mode by using pressing power button for 10 seconds.

Flashing with Flash Tool

You want a computer, flash device, flash file, USB drivers, and USB cable to flash with this method. All data might be deleted after flashing, so back up all data like pics and contacts, and so on to save your information loss.

  • Take a look at out beneath points to flash your Atom Ultimus Android phone with the flash device.
  • First download the flash file, flash device, and USB drivers for your pc.
  • Then, install the USB drivers to your Android phone.
  • Next, release the Flash device to your pc.
  • Then, switch off your phone.
  • After that, press and keep volume Up + power Button {or} volume Down + power Button
  • After that, connect your phone to the pc with a USB cable.
  • Then, browse the flash file within the flash device and click on at the download button.
  • Now, flashing begins to your phone.
  • Flashing takes 5 to 10 minutes. Please wait till flashing finished.

Download Flash Tool

Proper right here you may download the high-quality Android Flash equipment of Atom Ultimus phone without any fee. You may flash the firmware (stock ROM) with these flash tools.
Check out beneath hyperlink to download the Flash tools.

Download USB Drivers

Proper right here you could download and installation Atom Ultimus phone USB (normal Serial Bus) drivers free of charge. We offer authentic links for original tool producers websites.

Take a look at out under hyperlink to download the USB drivers.

Download USB Drivers

Atom Supremus Flash File

Here you could download flash file for Atom Supremus Android phone. You may download and install the latest and original stock ROM (Firmware) free of charge. Moreover, flash tools to be hard to flash your Atom mobile.

Flashing stock firmware will permanently delete your device information. If possible, backup all personal information like photos, contacts, and apps, and so on to prevent data loss.

Download Atom Supremus official stock firmware from the link here, and observe the furnished flashing instructions to learn how to flash the stock ROM.

What is Android Flashing?

Android Flashing means putting off stock firmware (software) from android device and replace with identical model or some other model. Honestly, flashing means converting the working device. You may flash your tool with recovery mode or Flash device.

You could upgrade or downgrade the firmware with flashing. Flashing will fix software issues, IMEI related issues and enhance tool basic performance. Flashing delete all your device data like photos, contacts, and apps, and so on.

What is the Stock ROM?

Stock ROMs are those that come through default in Android gadgets like smartphone and tablets and so forth. These are customized versions of Android advanced by means of manner of producers and vendors to permit users keep on with their gadgets with specific looks and functions. All the “out-of-the-box” smartphones or tablets or other gadgets are all shipped with stock ROM.

Benefit Of Atom Supremus Firmware

  • To clear up the lag or stutter
  • Update and downgrade
  • Flash stock ROM to unbrick your Atom Supremus Android mobile
  • By means of flashing stock ROM, you could restore software program troubles.
  • Uproot or fix bugs at the smartphone
  • Smartphone boots directly into its bootloader
  • Revert to stock to get your guarantee
  • keeps rebooting trouble
  • In case your smartphone boots immediately into recovery

Before Flashing

Charge the phone as a minimum of 50% without interrupting the flashing manner with a low battery. Interrupting the firmware installation approach, bricking your cellphone.

Flashing with Recovery Mode

This method will delete all your data in your Atom Supremus Android mobile like media, contacts, and apps. So back up your mobile data earlier than the flashing process on your mobile.

Follow these steps to flash stock firmware with Recovery mode.

Method 1

  • Download the firmware file and move it to SD Card storage.
  • Firstly, turn off your device and wait some time.
  • In this step, press and hold the
    • Volume Up and power button or
    • Volume down and power button
  • Next, release all buttons when you see a Logo.
  • Now, You will see the Android exclamation mark.
  • Next, hold down the power button, press and release the Volume + Button.
wipe data/factory reset
  • After sometimes you got recovery mode, Use Volume choose the wipe data/factory reset and press the power key to confirm.
  • Then, select the option Yes.
  • As quickly as the reset is complete, you’ll be bounced again to the recovery mode menu.
  • Now select apply update from SD card option.
  • Then find the downloaded firmware file from storage.
  • After that, tap at the firmware file and install it.
  • Your device will start updating automatically.
  • Spontaneously, your device should boot to the new version.

If the above method does not work, observe this Hard reset to wipe all data.

Method – 2

  • Download the firmware file and move it to SD Card storage.
  • Firstly, turn off your device and wait some time.
  • In this step, press and hold the
    • Volume Up and power button or
    • Volume down and power button
  • In this step, release all buttons when you see a Logo.
  • Now, You will see the Android exclamation mark.
  • Next, hold down the power button, press and release the Volume + Button.
  • After sometimes you got recovery mode, Use Volume choose the wipe data/factory reset and press the power key to confirm.
  • Then, select the option Yes.
  • Subsequent, pick out the Reboot to device option.
  • After that, download the Firmware update file and move to drive storage (Do not put the file within the folder).
  • Then locate the downloaded firmware file from storage.
Flashing with Recovery
  • Now, tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • Ultimately, your device should boot to the new edition.

If the above method does not work, observe this Hard reset to wipe all data.

Exit Recovery mode

If you’re caught at recovery mode or do you want to go out from recovery, follow these steps.

  • Select the Reboot system option, the use of volume keys, and press the power key to confirm.
  • Next, Your device will be rebooted automatically.
  • Now you’re successfully excited from recovery mode.
  • You may additionally go out from recovery mode by using pressing power button for 10 seconds.

Flashing with Flash Tool

You want a computer, flash device, flash file, USB drivers, and USB cable to flash with this method. All data might be deleted after flashing, so back up all data like pics and contacts, and so on to save your information loss.

  • Take a look at out beneath points to flash your Atom Supremus Android phone with the flash device.
  • First download the flash file, flash device, and USB drivers for your pc.
  • Then, install the USB drivers to your Android phone.
  • Next, release the Flash device to your pc.
  • Then, switch off your phone.
  • After that, press and keep volume Up + power Button {or} volume Down + power Button
  • After that, connect your phone to the pc with a USB cable.
  • Then, browse the flash file within the flash device and click on at the download button.
  • Now, flashing begins to your phone.
  • Flashing takes 5 to 10 minutes. Please wait till flashing finished.

Download Flash Tool

Proper right here you may download the high-quality Android Flash equipment of Atom Supremus phone without any fee. You may flash the firmware (stock ROM) with these flash tools.
Check out beneath hyperlink to download the Flash tools.

Download USB Drivers

Proper right here you could download and installation Atom Supremus phone USB (normal Serial Bus) drivers free of charge. We offer authentic links for original tool producers websites.

Take a look at out under hyperlink to download the USB drivers.

Download USB Drivers

Hard Reset Atom Android Phone

In case your Atom Android phone is running slow otherwise you need to sell it, you may reset your mobile if you forget the password or pattern lock, then it’s like a brand-new phone.

You can without problems Hard Reset your android smartphone at no cost. Right here, we additionally provide reset with Google find my device. Please notice that a hard reset deletes all of your data from your smartphone. You will not recover your information like apps, contacts, and files, etc.

Right here are the excellent methods to reset your Atom mobile. There are numerous methods available to reset your Android mobile. You can try the subsequent methods one by one.

Choose your Mobile

Hard Reset

A factory reset, additionally referred to as a hard reset or master reset, is an effective, last-resort method of troubleshooting for mobile phones. It’ll restore your smartphone to its original factory settings, erasing all your information in the method. Due to this, it’s important to back up the information before you do a factory reset.

Please bear in mind:– hard reset will delete any and all information on your device; like pics, contacts, messages, apps, and many others. The device will be brought back to the same configuration as that of a brand new device.

Reset with Google Find My Device

You can also reset your Atom smartphone with Google find my device. This technique also removes all of your Android smartphone data. After your device has been erased, you couldn’t find it.

  • First of all, open any browser and search for Google find my device.
  • Then, log out of your computer account and log in with your smartphone account.
  • Next, you’ll find three options on the screen, Play sound, secure device, and Erase device.
Unlock with Google Find My Device
  • In this step, select the Erase device option.
  • Subsequently, Choose the Erase all data option.
  • After that, Confirm Erase option.
  • It will wipe all your data from your smartphone.
  • In the end, the Atom device reset successfully.

Hard Reset Via Hard Reset

Hard Reset is the best method to reset your Atom without a password. You could effortlessly format with this method. All information will be deleted after a hard reset, You can not recover any information later.

  • First of all, turn off your device and wait some time.
  • Now press and hold the Volume Up and power button or
    • volume down and power button
  • Next, release all buttons when you see a Logo.
  • Subsequently, You will see the Android exclamation mark.
  • Next, hold down the power button, press and release the Volume + Button.
  • After a while you got recovery mode Use Volume choose the wipe data/factory reset and press the power key to confirm.
wipe data/factory reset
  • Then, select the option Yes.
select the option Yes
  • After that, select the Reboot system now option.
  • Reset completed on your Atom smartphone.

As soon as the Reset method is complete, your device will automatically restart and the primary opening can be a piece longer than usual. When you arrive in the Welcome screen, you may pass the setup method by logging in to your Google account, and you can do the restore information process.

Click on the link below to get all the Atom hard reset methods.

Hard Reset Your Android Mobile

Reset With Android Multi tools

Android Multi tools is a small utility to unlock and reset any Android smartphone without any password or PIN or pattern. You may also wipe data on your Android smartphone.

You can also Reset Gmail, Facebook, and Gesture lock on normal mode and fast boot mode with these tools.

  • First of all, power on your PC or laptop.
  • Subsequent, download the Android Multi tools.
  • In this step, Open the Android multi-tools.
  • After that, enable USB debugging on your Android smartphone.
  • Settings – developer’s option – USB Debugging.
Android Multi Tools
  • Now hold down the Volume + and Power Button (Volume – and Power Button) on your smartphone.
  • Subsequently, you may see the Android boot mode on your smartphone display.
  • Next, connect your mobile to your PC through USB.
  • Finally, select number five and press enter to reset your Android smartphone.
  • Reset completed on your Android smartphone with Android tools.

Unlock with Google Smart Lock

Google Smart Lock gives you manage over when and where you need to unlock your device. Smart Lock allows you to keep your device unlocked while it is on you, add locations where your device stays unlocked, and add Bluetooth devices that will keep your device unlocked even as they may be connected.

Google Smart Lock

Google Smart Lock features

  • On-body Detection
  • Trusted Devices
  • Trusted Places
  • Voice Match & Trusted Face

Smart Lock for Android automatically keeps your smartphone or tablet locked when it is not with you, and unlocked when your device is safe. You can select to have Android unlock primarily based on Bluetooth or NFC connections, trusted locations when you’re carrying your device with you, or when it recognizes your face or your voice.

Unlock With Backup PIN or Google Account

On every occasion, you set up a security lock using face unlock, face and voice, or pattern option, you will be prompted to set up a backup pin as well. If your device fails to recognize your face and/or voice otherwise you forget your pattern, the backup pin will be used to get past your screen lock.

Therefore, a backup unlocks PIN or pattern, as the name indicates, is a PIN on which you could fall back when you forget your screen lock or your device does not recognize you.

Google Account

You can additionally unlock any Android mobile with Google account. You need to add your Google account to your smartphone to unlock with this method.

  • First of all, power on your smartphone by pressing the power button.
  • After the number of unsuccessful attempts on your smartphone.
  • You will see the Forgot pattern option.
  • Next, tap on the Forgot pattern option.
  • subsequently, you should be able to enter your Google account login.
  • sooner or later, Your smartphone should now be unlocked.

Factory Reset

The easiest manner to factory reset your mobile is through the settings menu. If you can get the right of entry to the smartphone content, you may do formatting and factory reset methods using your device’s factory data reset menu.

If you know your smartphone password, you may use this method.

  • First of all, power on your smartphone by pressing the power button.
  • Then, Go to the Settings menu.
  • After that, click on the Backup and Reset option.
  • Now select the Factory Data Reset option.
  • Subsequently, choose the Reset phone option.
  • If you want to delete portable storage information, tap on the Erase everything.
  • Reset completed to your smartphone.

Click on the link below to get all the Atom factory reset methods.

Factory Reset Your Android Mobile

Hard Reset Atom Maximus

In case your Atom Android phone is running slow otherwise you need to sell it, you may reset your mobile if you forget the password or pattern lock, then it’s like a brand-new phone.

You can without problems Hard Reset your android smartphone at no cost. Right here, we additionally provide reset with Google find my device. Please notice that a hard reset deletes all of your data from your smartphone. You will not recover your information like apps, contacts, and files, etc.

Right here are the excellent methods to reset your Atom Maximus mobile. There are numerous methods available to reset your Android mobile. You can try the subsequent methods one by one.

Hard Reset

A factory reset, additionally referred to as a hard reset or master reset, is an effective, last-resort method of troubleshooting for mobile phones. It’ll restore your smartphone to its original factory settings, erasing all your information in the method. Due to this, it’s important to back up the information before you do a factory reset.

Please bear in mind:– hard reset will delete any and all information on your device; like pics, contacts, messages, apps, and many others. The device will be brought back to the same configuration as that of a brand new device.

Reset with Google Find My Device

You can also reset your Atom smartphone with Google find my device. This technique also removes all of your Android smartphone data. After your device has been erased, you couldn’t find it.

  • First of all, open any browser and search for Google find my device.
  • Then, log out of your computer account and log in with your smartphone account.
  • Next, you’ll find three options on the screen, Play sound, secure device, and Erase device.
Unlock with Google Find My Device
  • In this step, select the Erase device option.
  • Subsequently, Choose the Erase all data option.
  • After that, Confirm Erase option.
  • It will wipe all your data from your smartphone.
  • In the end, the Atom device reset successfully.

Hard Reset Via Hard Reset

Hard Reset is the best method to reset your Atom Maximus without a password. You could effortlessly format with this method. All information will be deleted after a hard reset, You can not recover any information later.

  • First of all, turn off your device and wait some time.
  • Now press and hold the Volume Up and power button or
    • volume down and power button
  • Next, release all buttons when you see a Logo.
  • Subsequently, You will see the Android exclamation mark.
  • Next, hold down the power button, press and release the Volume + Button.
  • After a while you got recovery mode Use Volume choose the wipe data/factory reset and press the power key to confirm.
wipe data/factory reset
  • Then, select the option Yes.
select the option Yes
  • After that, select the Reboot system now option.
  • Reset completed on your Atom smartphone.

As soon as the Reset method is complete, your device will automatically restart and the primary opening can be a piece longer than usual. When you arrive in the Welcome screen, you may pass the setup method by logging in to your Google account, and you can do the restore information process.

Click on the link below to get all the Atom hard reset methods.

Hard Reset Your Android Mobile

Reset With Android Multi tools

Android Multi tools is a small utility to unlock and reset any Android smartphone without any password or PIN or pattern. You may also wipe data on your Android smartphone.

You can also Reset Gmail, Facebook, and Gesture lock on normal mode and fast boot mode with these tools.

  • First of all, power on your PC or laptop.
  • Subsequent, download the Android Multi tools.
  • In this step, Open the Android multi-tools.
  • After that, enable USB debugging on your Android smartphone.
  • Settings – developer’s option – USB Debugging.
Android Multi Tools
  • Now hold down the Volume + and Power Button (Volume – and Power Button) on your smartphone.
  • Subsequently, you may see the Android boot mode on your smartphone display.
  • Next, connect your mobile to your PC through USB.
  • Finally, select number five and press enter to reset your Android smartphone.
  • Reset completed on your Android smartphone with Android tools.

Unlock with Google Smart Lock

Google Smart Lock gives you manage over when and where you need to unlock your device. Smart Lock allows you to keep your device unlocked while it is on you, add locations where your device stays unlocked, and add Bluetooth devices that will keep your device unlocked even as they may be connected.

Google Smart Lock

Google Smart Lock features

  • On-body Detection
  • Trusted Devices
  • Trusted Places
  • Voice Match & Trusted Face

Smart Lock for Android automatically keeps your smartphone or tablet locked when it is not with you, and unlocked when your device is safe. You can select to have Android unlock primarily based on Bluetooth or NFC connections, trusted locations when you’re carrying your device with you, or when it recognizes your face or your voice.

Unlock With Backup PIN or Google Account

On every occasion, you set up a security lock using face unlock, face and voice, or pattern option, you will be prompted to set up a backup pin as well. If your device fails to recognize your face and/or voice otherwise you forget your pattern, the backup pin will be used to get past your screen lock.

Therefore, a backup unlocks PIN or pattern, as the name indicates, is a PIN on which you could fall back when you forget your screen lock or your device does not recognize you.

Google Account

You can additionally unlock any Android mobile with Google account. You need to add your Google account to your smartphone to unlock with this method.

  • First of all, power on your smartphone by pressing the power button.
  • After the number of unsuccessful attempts on your smartphone.
  • You will see the Forgot pattern option.
  • Next, tap on the Forgot pattern option.
  • subsequently, you should be able to enter your Google account login.
  • sooner or later, Your smartphone should now be unlocked.

Factory Reset

The easiest manner to factory reset your mobile is through the settings menu. If you can get the right of entry to the smartphone content, you may do formatting and factory reset methods using your device’s factory data reset menu.

If you know your smartphone password, you may use this method.

  • First of all, power on your smartphone by pressing the power button.
  • Then, Go to the Settings menu.
  • After that, click on the Backup and Reset option.
  • Now select the Factory Data Reset option.
  • Subsequently, choose the Reset phone option.
  • If you want to delete portable storage information, tap on the Erase everything.
  • Reset completed to your smartphone.

Click on the link below to get all the Atom factory reset methods.

Factory Reset Your Android Mobile

Scroll to top